Skip to product information
SOLVENT-BASED ACRYLIC PAINT
Mr. COLOR Super Metallic 2 is our highest quality METALLIC paint series. Fine metallic particles create excellent finish to plastic surfaces. The painted surface shines like a real metal.
THINNING RATIO for Mr. COLOR SUPER METALLIC
It is not necessary to dilute low viscosity colors (SM206-SM208)
- BRUSH PAINTING: 1:0~1.0
- AIRBRUSHING: 1:1~2
- Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or Mr. COLOR RAPID THINNER.
- Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.
CAN BE MIXED WITH:
- Mr. Color
- Mr. Color GX
- Mr. Color 40th Anniversary, Mr. Clear Color, Mr. Crystal Color, Mr. Metallic Color
- Lascivus
CANNOT BE MIXED WITH:
- Aqueous Hobby Color
- Acrysion, Acrysion Base Colors
- Classy'n Dressy Colors
*AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.
*Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.
HOW TO APPLY Mr. COLOR SUPER METALLIC:
- Apply 1 to 2 coats if painting with a paint brush or 2 to 3 coats if airbrushing.
- After applying a coat, let it dry for a few hours. After the first coat is completely dry, apply a second coat.
TIP!
- For SM201-SM205, SM207 and SM209, seal the painted surface with Mr. Super Clear, Mr. Super Clear UV Cut or TOPCOAT.
- For SM206 and SM208, seal the painted surface ONLY WITH TOPCOAT. Aqueous Clear or Arysion Clear paints can also be applied.
- For SM206, apply Mr. COLOR or Mr. COLOR SPRAY BLACK (gloss) as a base coat before painting in order to give the best metallic touch.
- Fine metallic particles in the paint tend to settle easily, so stir the paint well when thinning and during painting.
- Use T114 Mr. Paint Remover to remove paint from a surface.
- Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
- Do a test paint before you apply paint on your model kit.