1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies
1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2) - MPM Hobbies

1/48 AN-Mk 1 Armour Piercing 1,600lb (Set of 2)

$13.79 
SKU: 0173
Free CONUS Shipping on all MPM Hobbies’ 3D Printed Products and **Free CONUS shipping on all orders over $100.00**
MPM Hobbies does not authorize any person, entity or establishment the right to distribute DISCOUNT CODES for use on our website. For more information, please visit our FAQs. Thank you.

3D Print Product Info
  1. Item(s) is/are LCD-based SLA printed using UV cured resin and will be shipped unpainted and with 3D print supports attached.
  2. Item can be primed with acrylic, lacquer or enamel type paint.
  3. Lightly sand and/or prime any horizontal striations due to the printing process.
  4. Remove supports starting from the tip down and start by freeing those supports connected to small and fragile details.
  5. Recommend using CA for attaching item to model or filling any imperfections.
  6. Item(s) will have features that are brittle or extremely delicate and prone to breaking if not properly handled.
  7. 3D print support configurations may be different than the ones in the photos if applicable.
  8. Photos may include the CAD rendered file used for printing to highlight details that do not stand out well in regular photos.
  9. Not intended for small children due to choking hazard and should only be purchased by experienced modelers due fine details and printer support removal.
  10. The number of items in your order is calculated by multiplying the quantity you selected by the number of items per set if applicable.
  11. All items are printed in the order they are purchased.
    The bodies are of single piece, forged, machined construction, with pointed noses, parallel sides, and slight boat tailing. The base plate is of the male type. Suspension in the 1,600 pound AP Bomb Mk 1 design was by means of lugs welded to bands, the bands being positioned by grooves on the external bomb surface. The newer designs, AN-Mk 1 and Mk 33, are suspended by fittings which screw into holes drilled into the bomb case and secured by bolts. The normal box-type tail assembly is used on these bombs.

    The later 1,600-pound AP Bombs Mk 1 Type were grooved to position the suspension band. Older bombs had a stud which fitted into a hole in the bomb body.

    The only fuze authorized for use with the AN-Mk 1 bomb is the AN-Mk 228 tail impact fuze.

    The difference between AN-Mk 1 Mod 1, AN-Mk 1 Mod 2, and AN-Mk 1 Mod 3 is in the manufacturer only; the complete rounds contain the same components and are the same in all physical aspects. US Bomb, 1600 lb AP, AN-Mk 1 Mod 1, 2, 3 (bulletpicker.com)