Skip to product information
Kato 23125 N Double Track Viaduct Station
-
Pack Includes Includes;
- 2 x Station Shop Sections.
- 1 x Station Main Entrance & Stairway.
- 2 x Platform Extension Plates.
- Asst 23-018 Piers.
- Asst Side Walls, Stickers.
- Asst S-Joiners.
-
Total Length 1240mm (49").
- Assembly Of This Station Kit Is A "Snap", Literally! All Pieces Snap Into Place And A Few Screws Are Needed To Secure All Items Into Place, But Absolutely No Glue/Adhesive Are Required. There Is Plenty Of Detail Moulded Into The Pieces, Including Stairs And Full Entrance Interior. Detail Stickers (Some In Japanese) And Small Detail Parts, Such As Overhead Sign Boards, Add Even More Character To The Overall Scene.
- The Most Obvious Layout Of Trackwork Spanning The Deck Of The Viaduct Station Is Parallel Straight Tracks. The Full Length Of The Deck Can Be Covered With Five Sections Of #20-000 248mm Straight Track Per Line - Track. Due To The Width Of The Deck, However, There Will Be Some Empty Space To The Side Of The Tracks If This Simple Straight-Through Avenue Is Used.
- A Much More Creative Application Is Diagrammed Below. The Basic Pattern Has One Track Passing Straight Across The Deck While The Second Line Literally Wraps Around A Centre Island Platform Parts. You Can See The Straight-Through Track Uses The Five (5) Sections Of #20-000 248mm Straight Track As Mentioned Above, While The Second Line - Track Utilizes Four (4) Pieces Of #20-160 481mm Radius-15º Curved Track With Three (3) Pieces Of 248mm Straight. It Is Important To Recognize Only The R481-15º Curves Can Be Used With The Island Platform Pieces Specified (#23-100, 23-101 And 23-105) To Create This Smooth Wraparound.
- If Two Tracks Through The Station Is Fun, Just Imagine How Exciting Four Tracks Can Be! A More Advanced Application Of The Basic Pattern Detailed Above Can Be Achieved With The Addition Of A Second #23-125 Double Track Viaduct Station Set Or The #23-232 Viaduct Platform Extension Kit. The Illustration Below Shows One End Of The Station Deck Is Expanded To Double The Width Of The Basic Kit. You Can See This Design Incorporates A Left (#20-220) And Right (#20-221) #4 Turnout On The Mainlines As They Pass Through The Centre Of The Station. These Turnouts Allows For An Outside Diverging Route To Once Again Wrap Around The Outside Edge Of The Island Platform. Once Again, The Diagram Is Of Only One End Of The Station Deck. It Is Also Important To Note The Deck Sections Are Held Together With The Use Of The S-Joiner (24-817).
- Assembly Of This Station Kit Is A "Snap", Literally! All Pieces Snap Into Place And A Few Screws Are Needed To Secure All Items Into Place, But Absolutely No Glue/Adhesive Are Required. There Is Plenty Of Detail Moulded Into The Pieces, Including Stairs And Full Entrance Interior. Detail Stickers (Some In Japanese) And Small Detail Parts, Such As Overhead Sign Boards, Add Even More Character To The Overall Scene.