This item is in stock and usually ships within 2 working days
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies
1/16 IMEX Slider 4WD Drift Car Brushless 16315 - MPM Hobbies

1/16 IMEX Slider 4WD Drift Car Brushless 16315

$127.17 
Free CONUS Economy Shipping on All In Stock Orders $100.00 or More
SKU: IMX16315IH
Availability: 1 in stock
Try Lay-Buy at checkout. Minimum of 20% down and maximum 6 months "Lay Away" plan. Your product will be shipped after balance is paid. Pre-orders will ship after balance is paid in full and product becomes available. Select "PUT IT ON LAY-BUY' at checkout and spread out those payments. Terms and restrictions apply.
← Previous Product

The IMEX Slider is a ready-to-run 1/16 scale 4WD brushless drift car with a 2.4GHz radio system and a built-in drift gyro. It suits hobbyists who want a complete drift-ready car with adjustable driver assistance rather than a build project.

Drift Performance

All-time 4WD and an integrated Electronic Stability Program (gyro) help correct yaw and keep slides controllable. Gyro gain is adjustable from the transmitter, so you can dial in as much or as little assistance as you want while you learn.

Chassis and Drivetrain

  • Fully proportional 1/16 scale 4WD on-road drift chassis
  • Brushless power with forward, brake and reverse
  • Two oil-filled gear differentials and a full set of ball bearings
  • Final drive ratio 6.05:1, internal gear ratio 2.8:1.1, 16T pinion and 38T spur
  • Independent suspension with front and rear bumpers
  • Integrated chassis and diffuser

Radio and Electronics

  • 4-channel 2.4GHz integrated receiver and electronic speed control
  • Waterproof and dustproof design with low-voltage cutoff and thermal overload protection
  • Adjustable brake, BEC, LVC sensitivity, reverse speed and motor timing
  • Waterproof steering servo: 2.3 kg torque at 6V, 0.10 sec/60° at 6V, 40 x 29.6 x 13.2mm
  • LED headlights with red halo lenses that can be switched on or off individually
  • Control range of about 60 meters

Tires and Wheels

  • Two tire sets included: rubber tires and plastic drift tires
  • Replaceable wheels so you can swap surfaces easily

Power and Run Time

  • 7.4V 1200mAh (8.88Wh) rechargeable Li-ion battery included
  • USB charger included, usable with a phone charger, power bank, computer or car charger
  • Run time of about 15 minutes per charge
  • Transmitter requires 4 AA batteries, which are not included

Specifications

  • Scale: 1/16
  • Completion level: ready-to-run
  • Drivetrain: 4WD, on-road
  • Length 11.81 in (300mm), width 5.91 in (150mm), height 3.93 in (100mm)
  • Wheelbase 6.69 in (170mm), front and rear track 3.98 in (101mm)
  • Ground clearance 0.39 in (10mm)
  • Weight 1.4 lbs (635.5g)
  • Gear pitch: 0.5/0.7/1.0 MOD

In the Box

  • 1 RC car with radio, receiver, servo and speed control installed
  • 1 battery
  • 4 spare drift tires
  • 1 USB charger
  • 1 small tool set
  • 1 instruction manual

Related Products

Browse more R/C electronic accessories at MPM Hobbies, or see the full lineup at IMEX Model Company.