Bob Smith Industries Insta-Cure Super Thin 1/2oz 101

Bob Smith Industries Insta-Cure Super Thin is a water-thin cyanoacrylate (CA) adhesive for scale modelers who need fast, precise bonding of tight-fitting parts. Its low-viscosity formula wicks deep into joints by capillary action, creating strong bonds in seconds.

Key Features

• Water-thin viscosity for deep capillary penetration into tight joints
• Bonds in approximately 1–3 seconds; full strength is reached in about two hours
• 1/2oz bottle with an extender tip for fine, controlled application
• Suitable for balsa wood, plastic, and other modeling materials
• Cured adhesive remains stable from -40°F to 220°F

Applications

Insta-Cure Super Thin is designed for close-fitting parts where gap filling is not needed. It works well on balsa aircraft assemblies, plastic model seams, photo-etch attachment, and general model construction. Browse CA adhesives and accelerators for complementary supplies.

Usage Tips

• Hold tight-fitting parts together and apply CA along the joint edges for capillary wicking
• Use the included extender tip for fine applications
• Clean the nozzle before replacing the screw-on top to help prevent clogging
• Refrigerate the adhesive to extend shelf life
• Remove excess cured CA with Un-Cure and clean the extender tip by soaking it in acetone

Safety Information

At the moment of cure, CA adhesives release a vapor that may irritate the nose and eyes. Use in a well-ventilated area.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.

Manufacturer Information

Visit the Bob Smith Industries website for additional product information.