Bob Smith Industries Insta-Cure+ Gap Filling CA 1/2oz

BSI Insta-Cure+™ Gap Filling Cyanoacrylate Adhesive — 1/2 oz

Bob Smith Industries Insta-Cure+™ is a medium-viscosity CA adhesive engineered to bridge gaps and bond loose-fitting joints. Ideal for RC aircraft builders, scale modelers, and hobbyists working with balsa, wood, fiberglass, and more.

Key Features

• Medium (gap-filling) viscosity — bridges loose joints and larger bonding surfaces
• Bonds in 5–15 seconds under firm pressure
• Full cure strength reached in approximately 3 hours
• Water-resistant when cured; stable from -40° to 220°F
• Compatible with Insta-Set™ accelerator for faster cure of squeeze-out
• 1/2 oz (14g) bottle with screw-on nozzle cap and extender tip
• Refrigerate to extend shelf life

Best Bonding Performance

Works Best On

• Balsa wood
• Soft wood

Works Well On

• Hard wood
• Glass & metal
• Fiberglass
• Ceramics
• Hard plastics
• Rubber
• Laminating applications

How to Use

Unscrew the top from the nozzle. For finer applications, attach the extender tip. Apply Insta-Cure+™ to one surface and hold parts firmly together for 5–15 seconds. For larger bonding areas, apply serpentine beads with spacing to allow the adhesive to spread. Spray Insta-Set™ accelerator to cure any squeeze-out. Wipe the nozzle clean before replacing the cap. Soak the extender tip in acetone to clean.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer.

Browse our full selection of CA adhesives and accelerators at MPM Hobbies.