Skip to product information
1/72 AN-M66A2 2000lbs (Set of 2).
1/72 AN-M66A2 2000lbs (Set of 2).
1/72 AN-M66A2 2000lbs (Set of 2).
1/72 AN-M66A2 2000lbs (Set of 2).
1/72 AN-M66A2 2000lbs (Set of 2).
1/72 AN-M66A2 2000lbs (Set of 2).

1/72 AN-M66A2 2000lbs (Set of 2)

$13.99 $16.23
SKU: 0168
Free Shipping on all MPM Hobbies’ 3D Printed Products
MPM Hobbies does not authorize any person, entity or establishment the right to distribute DISCOUNT CODES for use on our website. For more information, please visit our FAQs. Thank you.

3D Print Product Info

  1. High-Quality LCD-Based SLA Printed Resin Items at MPM Hobbies

  2. At MPM Hobbies, we offer a diverse range of LCD-based SLA printed resin items that are meticulously crafted using UV-cured resin. These items are shipped unpainted and come with 3D print supports attached to ensure their structural integrity during shipping.
  3. Exceptional Printing Process: To ensure the highest quality, all our items undergo a thorough cleaning process. Each item goes through a 20-minute wash cycle followed by two ten-minute sonic wash cycles. Finally, it undergoes a 2-to-8-minute curing process. This meticulous process guarantees that you receive a clean and well-prepared item ready for your creative touch.
  4. Painting and Finishing Recommendations: Our items can be easily primed with acrylic, lacquer, or enamel type paints. It is recommended to lightly sand and/or prime any horizontal striations that may be present due to the printing process. When removing the supports, it is advisable to start from the tip down and begin with the supports connected to small and fragile details. For attaching the item to your model or filling any imperfections, we recommend using CA (cyanoacrylate) adhesive.
  5. Handle with Care: Please note that some features of our items may be brittle or extremely delicate, requiring careful handling to prevent breakage. We advise that our products are not intended for small children due to the choking hazard and should only be purchased by experienced modelers who can appreciate and handle the fine details and delicate nature of these items.
  6. Accurate Representation and Configuration: Please be aware that the 3D print support configurations may differ from the ones shown in the product photos, if applicable. The product photos may include CAD rendered files used for printing to highlight intricate details that may not be easily visible in regular photos.
  7. Order Quantity and Hollow Parts: The number of items in your order is determined by multiplying the quantity you selected by the number of items per set, if applicable. Additionally, you may notice small holes on the print, which are necessary for draining any leftover resin from the hollow parts of the item. Simply fill these holes with CA adhesive and sand them for a smooth finish.
  8. Visit our website at to explore our wide range of LCD-based SLA printed resin items. We prioritize quality and provide a seamless shopping experience for hobbyists and modelers alike.
  9. For any inquiries or assistance, feel free to contact our knowledgeable team at or call 1-800-123-4567. Trust MPM Hobbies to deliver exceptional products and meet your modeling needs.

    The 2000 lb GP Bomb AN-M66A2 has a cylindrical metal case, an ogival nose, and a tapered aft end. A box-type fin assembly is secured to the aft end of the bomb with a fin locknut.

    The bomb accommodates a nose and a tail fuze, both of which are used for the majority of bombing operations. The bomb has an adapter-booster capable of receiving tail fuzes with a 2-inch thread diameter. A fuze adapter may be inserted into the adapter- booster to accommodate smaller fuzes with iy2-inch diameter threads.

    Special studs attached to the base plug and imbedded in the solidified explosive filler prevent removal of the base plug. The adapter-booster (and fuze adapter, when used) are locked to the base plug with a locking pin that extends from the adapter- booster to a groove in the base plug.

    Approximately 50 percent of the complete weight of the bomb consists of explosive filler. Two suspension lugs are welded to the bomb case with 30 inches between centers. A single suspension lug is welded to the case on the opposite side at the center of gravity.

    The bomb is painted olive drab; yellow color bands and black stenciled nomenclature identify the bomb and its high-explosive charge.

    The AN-M66A2 and AN-M66A1 bombs contain antiwithdrawal pins in the base plug and an adapter-booster and fuze adapter that can be locked in place. The earlier AN-M66 bomb lacks these features.
    The AN-M66A2 differs further from the AN-M66A1 and AN-M66 bombs by having a thicker and rounder nose. In the AN- M66A2 bomb, the ratio of explosive charge to total weight is approximately 50 percent as compared to an average weight ratio of 53 percent in the other two bombs.

    The AN-M34 bomb, an earlier model of the 2000-lb GP Bomb, is similar to the AN-M66 but has an Adapter-Booster M102 which will accept only those fuzes with a 1-1/2 inch diameter thread.

    The M34 is identified by the tail-base cap and two Army suspension lugs. The suspension lugs are 30 inches apart. The AN-M34 has the additional single suspension lug and the tail-base plug. The single lug is on the center of gravity 33.5 inches behind the nose. The AN-M66 can be distinguished by the M115 Adapter Booster, used to adapt Navy fuzes to Army bombs.  US Bomb, 2000 lb GP, M34, AN-M34, AN-M66, AN-M66A1, AN-M66A2 (