Skip to product information
1/72 AN-M65A1 1000lbs (Set of 4).
1/72 AN-M65A1 1000lbs (Set of 4).
1/72 AN-M65A1 1000lbs (Set of 4).
1/72 AN-M65A1 1000lbs (Set of 4).
1/72 AN-M65A1 1000lbs (Set of 4).
1/72 AN-M65A1 1000lbs (Set of 4).

1/72 AN-M65A1 1000lbs (Set of 4)

$13.99 $17.26
SKU: 0237
Free Shipping on all MPM Hobbies’ 3D Printed Products
MPM Hobbies does not authorize any person, entity or establishment the right to distribute DISCOUNT CODES for use on our website. For more information, please visit our FAQs. Thank you.

3D Print Product Info

  1. High-Quality LCD-Based SLA Printed Resin Items at MPM Hobbies

  2. At MPM Hobbies, we offer a diverse range of LCD-based SLA printed resin items that are meticulously crafted using UV-cured resin. These items are shipped unpainted and come with 3D print supports attached to ensure their structural integrity during shipping.
  3. Exceptional Printing Process: To ensure the highest quality, all our items undergo a thorough cleaning process. Each item goes through a 20-minute wash cycle followed by two ten-minute sonic wash cycles. Finally, it undergoes a 2-to-8-minute curing process. This meticulous process guarantees that you receive a clean and well-prepared item ready for your creative touch.
  4. Painting and Finishing Recommendations: Our items can be easily primed with acrylic, lacquer, or enamel type paints. It is recommended to lightly sand and/or prime any horizontal striations that may be present due to the printing process. When removing the supports, it is advisable to start from the tip down and begin with the supports connected to small and fragile details. For attaching the item to your model or filling any imperfections, we recommend using CA (cyanoacrylate) adhesive.
  5. Handle with Care: Please note that some features of our items may be brittle or extremely delicate, requiring careful handling to prevent breakage. We advise that our products are not intended for small children due to the choking hazard and should only be purchased by experienced modelers who can appreciate and handle the fine details and delicate nature of these items.
  6. Accurate Representation and Configuration: Please be aware that the 3D print support configurations may differ from the ones shown in the product photos, if applicable. The product photos may include CAD rendered files used for printing to highlight intricate details that may not be easily visible in regular photos.
  7. Order Quantity and Hollow Parts: The number of items in your order is determined by multiplying the quantity you selected by the number of items per set, if applicable. Additionally, you may notice small holes on the print, which are necessary for draining any leftover resin from the hollow parts of the item. Simply fill these holes with CA adhesive and sand them for a smooth finish.
  8. Visit our website at to explore our wide range of LCD-based SLA printed resin items. We prioritize quality and provide a seamless shopping experience for hobbyists and modelers alike.
  9. For any inquiries or assistance, feel free to contact our knowledgeable team at or call 1-800-123-4567. Trust MPM Hobbies to deliver exceptional products and meet your modeling needs.

    These bombs are all general purpose high explosive bombs.

    The 1000 lb GP Bomb AN-M65A1 has a cylindrical metal casing, an ogival nose, and a tapered aft end. A box-type fin assembly is secured to the aft end of the bomb with a fin locknut.

    Both a nose and a tail fuze are generally used for the majority of operations with this bomb. The AN-M65A1 uses an adapter-booster that will accommodate tail fuzes with 2-inch diameter threads. A fuze adapter is used on the inside of the adapter- booster to convert the seat to accommodate fuzes with the smaller 1-1/2 inch threads.

    Special studs attached to the base plug and imbedded in the solidified explosive filler prevent removal of the base plug. The adapter-booster and fuze adapter are locked to the base plug with a locking pin that extends from the adapter-booster to a groove in the base plug.

    Approximately 50 percent of the complete weight of the bomb is explosive filler. Double suspension lugs are welded 14 inches apart and a single suspension lug is welded to the opposite side of the bomb case.

    The bomb is painted olive drab; yellow color bands and black stenciled nomenclature identify the bomb and its high explosive charge.

    The AN-M65A1 bomb contains antiwithdrawal pins in the base plug and an adapter-booster and fuze adapter that can be locked in place. The earlier AN-M65 bomb lacks these antiwithdrawal features.

    Released weight of the AN-M65 is greater than that of the AN-M65A1, the AN-M65 having an explosive charge of 53 percent as compared to the 50 percent ratio of the AN- M65A1 bomb.

    The AN-M44 bomb, an earlier model of the 1000 lb GP bomb, is similar to the AN-M65 but has an Adapter-Booster M102 assembled which will accept only fuzes with a 1-1/2 inch diameter thread.  US Bomb, 1000 lb GP, AN-M44, AN-M65, AN-M65A1 (